fbpx

myHARDI How-to Videos

video Cleaning your Sprayer

In Instructional Videos

It's good practice to clean the sprayer immediately after use. A clean sprayer is safe, won't be damaged by residues, is ready to use and you avoid crop damage.

Cleaning starts by reading and understanding the pesticide label and sprayer cleaning instructions, before you start spraying. Some pesticides require specific deactivating agents or cleaning procedures. Some pesticides like sulphonyl ureas are extremely active, even at very low concentrations.

Protect your farming tools, your health and your crops by cleaning the sprayer properly. We hope these tips will help you.

video Pressure Equalisation Adjustment

In Instructional Videos

Official HARDI instruction video- Learn how to fix pressure drop when i.e. turning boom sections off.

video A Guide to Choosing Filters

In Instructional Videos

In this film, we'll guide you through choosing filters Filters on your sprayer are there to protect the components and prevent nozzle blockage Learn about which filters are needed for your sprayer and why.

We go through filters used for: water entering the the sprayer during filling, suction filters placed before the pump, pressure filters for water on its way to the nozzles, and nozzles filters.

HARDI filters are color-coded and each color represents a different mesh size (threads per inch). HARDI's mesh sizes are 30, 50 80 and 100

video TWIN System - In-field Adjustments

In Instructional Videos

HARDI TWIN system allows you to reduce drift even in windy conditions and driving at higher speeds. You can also reduce you liquid use, saving you filling times, and even save money on less chemical use. Operators who have used the TWIN system have said they can't imagine going back to conventional spraying.

video HC 6500 Startup Basics Popular

In Instructional Videos

HARDI's controller HC 6500 was made specifically for spraying. This video shows you some of the features available